Inhaltsverzeichnis   MOBOTIX Online-Hilfe


The MxActivitySensor reacts to continuous movements within specific image areas. You can define one or more independent image areas for each image sensor (camera image). Since the MxActivitySensor only reacts to relevant movements, events are triggered with a certain delay after the first appearance of an object. For recording, you can compensate this behavior by adjusting the Recording Time Before Event accordingly. Likewise, the measured activity fades away with a certain delay, which may prompt additional alarms. You can control this behavior by adjusting the Event Dead Time accordingly.

In order to obtain best results, the scene should be well-illuminated, so that the objects that are to be detected show sufficient contrast against the background of the image. In addition, you should choose the camera image in such a way, that the camera can follow objects within the detection area for several seconds.

Note that you can create different image analysis events, which react to different detection areas. In addition, it is also possible to detect only specific directions of movement.

General MxActivitySensor Settings

Detection of Fast Motion

By activating this checkbox, you can improve the detection of fast objects by MxActivitySensor. However, using this option can reduce the recognition results of small objects.

Show Direction Indicator

When activating this checkbox, the direction indicator is displayed in the live image. This display combines all active profiles of the MxActivitySensor type. The direction indicator is not available for every display mode.

Show Detection Area

To display the detection areas of an MxActivitySensor profile, select the corresponding profile in the Image Analysis Events dialog.

Window Definitions

Every line in the definition box that does not begin with a hash sign (#, comments) defines one window. The windows can be defined either as rectangles or as polygons.

Rectangle syntax:
[!]image sensor, horizontal position, vertical position, width, height
(optional parameters have square brackets).

Example: 0,270,190,100,100

Polygon syntax:
[!]image sensor, poly=<hor. coordinate>x<vert. coordinate>{/<hor. coordinate>x<vert. coordinate>}
(optional parameters have square brackets, parameters that can be used as often as needed have curly brackets).

Example: 0,poly=270x190/270x289/369x289/369x190


Parameter Description
! Defines an area that is excluded from analysis (this area should always be inside of the area that is to be analyzed).
Image Sensor Selects the image sensor (camera image) to use for this window definition:
  • 0: Right camera image on dual cameras, default setting on mono cameras.
  • 1: Left camera image on dual cameras.
Horizontal position Position of the left window border measured from the left edge of the visible image in pixels (based on a MEGA image 1280x960).
Vertical position Position of the lower window border measured from the lower edge of the visible image in pixels (based on a MEGA image 1280x960).
Width Width of the window in pixels (based on a MEGA image 1280x960).
Height Width of the window in pixels (based on a MEGA image 1280x960).
Horizontal Coordinate Position of the left exposure window border measured horizontally from the left edge of the visible image to the polygon corner in pixels (based on a MEGA image 1280x960).
Vertical Coordinate Position of the left exposure window border measured vertically from the bottom edge of the visible image to the polygon corner in pixels (based on a MEGA image 1280x960).

Note: If you would like to define a new or additional window, open the Image Analysis Events dialog and follow the instructions of the Graphically Entering Image Areas help page.

Using Comments to Deactivate Window Definitions

In order to temporarily deactivate windows, place a hash sign (#) in front of the definition. This window definition will still be saved, but will not be used as detection area. In addition, comments generally help keep an overview if the window definitions are complex.

Detection Threshold

This trigger value sets the activity that needs to be measured in the area of analysis before the MxActivitySensor triggers. The higher the value, the slower MxActivitySensor will trigger; using a lower value require less activity before MxActivitySensor triggers. Value range: 0..99.

In order to determine a good value for the Detection Threshold, you can open the Text & Display Settings dialog and activate the corresponding Level Meter (Bar or Scroll Chart; you may have to click on More at the bottom of the dialog to see these options). Select the corresponding Image Analysis: <event name> entry from the Level Meter Data list and click on the Set button. You can now test the settings by having test persons walk through the image, for example.

Select Direction Triggers

Activate the directions of movement that will trigger reactions of the camera (e.g., recording).

Copy Window Definitions

If this option is activated, all window definitions will be used on both image sensors. This option is only available on Day/Night models.

Dual Lens Video Motion

Activating this option will detect video motion on both image sensors (regardless of which sensor is actually shown on the Live screen). Note that using this option may reduce the maximum frame rate. A window explicitly defined for the left image sensor will remain active, even if you only see the image of the camera's right image sensor. This means that the camera will react on events detected on the left (invisible) image sensor. This option is only available on Dual models.

Konfiguration sichern

Klicken Sie auf Setzen, um die Einstellungen zu aktivieren und bis zum nächsten Neustart der Kamera zu sichern.

Klicken Sie auf Voreinstellung, um diesen Dialog auf die werkseitigen Voreinstellungen zurückzusetzen (dieser Button wird nicht in allen Dialogen angezeigt).

Klicken Sie auf Zurückholen, um alle Änderungen seit dem letzten permanenten Speichern der Konfiguration zu verwerfen.

Beenden Sie den Dialog durch Klick auf Schließen. Hierbei wird geprüft, ob Änderungen der Gesamtkonfiguration vorliegen. Ist dies der Fall, werden Sie gefragt, ob die Gesamtkonfiguration dauerhaft gesichert werden soll.

cn, de, en, es, fr, it, jp, ru

© 2001-2024 MOBOTIX AG, Germany ·